Precision/Sniper Rifle Show and Tell

[straight-shooter]

Savage 10 FCP-K (.308) with:
- Harris height adjustable bi-pod
- fluted barrel
- muzzle break/flash hider
- 6-24x50 30mm Hawke scope with Blackhawk tactical rings

Very nice! Your definitely going to like that setup. Now you just need to get to the range and give us a report.

 

[hnts4fun]

Nothing fancy. Factory Remington Sendero, 7 mm Remington Magnum, Nightforce 3.5 x 15, Harris bipod, Idaho handmade muzzle brake. While this rifle has turned in a group or two of 0.5 inch at 200 yards it is generally a one half MOA rifle. 4 -5 inch groups at 650 yards. This buck stood still at 200 yards and my buddy wouldn't drive the truck any further away I'm more than happy to oblige a complaint animal at 200 yards or less.

 

[Mancosman]

Yeah after mounting they boresighted it to 100yds to hit paper so I want to go and sight it in and then hopefully dial it in to try and reach out to around 300-400yds

 

[Notavictim646]

Here she is. About three weeks ago I had decided it was just not in the cards for me to keep and shoot a precision rifle. I traded my savage 10 away thinking I was done for awhile. Then I saw this. I cannot take any credit for the build. It was done by a fellow INGO member but he offered to let me shoot it before buying and, well, that was it. It is a 700P in .308 with an IOR 3-18X42 scope and lots of other goodies. Anyway this thing shoots Gold Medal Match about 3/4" at 100 yds. I think I might just start reloading .308 for accuracy again. Just when you thought you had sworn off something............. Any of you guys ever do that?

Barrel cut to 20"

Typical group of GM Match. Smallest was .272" Worst was 1.07"

And it's threaded for a suppressor.....Just might take the plunge, who knows.

 

[sgreen3]

Here she is. About three weeks ago I had decided it was just not in the cards for me to keep and shoot a precision rifle. I traded my savage 10 away thinking I was done for awhile. Then I saw this. I cannot take any credit for the build. It was done by a fellow INGO member but he offered to let me shoot it before buying and, well, that was it. It is a 700P in .308 with an IOR 3-18X42 scope and lots of other goodies. Anyway this thing shoots Gold Medal Match about 3/4" at 100 yds. I think I might just start reloading .308 for accuracy again. Just when you thought you had sworn off something............. Any of you guys ever do that?

Barrel cut to 20"



Typical group of GM Match. Smallest was .272" Worst was 1.07"




And it's threaded for a suppressor.....Just might take the plunge, who knows.

Yup Ive threatend to sell my Savage 10FP SR to fund other stuff, but then I take it back to range with my handloads and it shoots 1/2" at 100yrds and I cant bear to let it go . Start loading up your own and see those groups tighten up for sure. Congrats on the rifle!

 

[Fatal T]

Savage 110 BAT/S

 

[Fatal T]

10 shot group @ 100yds

 

[straight-shooter]

Savage FCP .308

I changed out the factory stock with a Choate Tactical. I can't wait to get it to the range and see what improvements it may have made.

 

[sgreen3]

Savage FCP .308

I changed out the factory stock with a Choate Tactical. I can't wait to get it to the range and see what improvements it may have made.

Nice ! Im looking to get one of the same stocks, for my 10FP SR. Let us know how you like it.

 

[straight-shooter]

Nice ! Im looking to get one of the same stocks, for my 10FP SR. Let us know how you like it.

I like it very much! I just got back from the range after the first outing using this stock and i can say it's worth it.

 

[teddy12b]

I like it very much! I just got back from the range after the first outing using this stock and i can say it's worth it.

How's the gap around the barrel near the end of the forend. I was super excited when those stocks came out and then every one I saw had a messed up barrel channel. That's been a year or two though and they might have it squared away now.

 

[straight-shooter]

How's the gap around the barrel near the end of the forend. I was super excited when those stocks came out and then every one I saw had a messed up barrel channel. That's been a year or two though and they might have it squared away now.

The gap appears to be about 1/8" or probably a little less and the barrel lays in perfectly straight along the entire channel and floated. I see no imperfections. Usually once a manufacturer gets enough complaints then it's taken care of i would suspect.

 

[curraheeguns]

Built as a hunting gun with the love, parts and tools of a sniper gun.

My newly finished .358 Hoosier custom rifle. Now to test fire, find a load she likes to eat and set back and wait on deer season!!!

Specs:

Action: Remington 700 Factory Stock (Started Life As A Rem 700 SPS in .22-250)
Barrel: Shillen Stainless
Custom Build Work: AJ Brown Arms, Co.
Trigger: Timney 510 set at 2.5 pounds
Stock: McMillan HTG w/ Texture, Pillar Bedding & Factory Sling/Bipod Mounts in GAP camo.
Bases: Leupold
Rings: Leupold
Scope: Ziess Conquest 3-9x40
Bipod: Harris
Trigger Guard & Screws: Brownells Steel BDM
Internal Box Mag, Spring & Follower: Remington Factory Stock
Bolt: Remington Factory Stock

 

[mammynun]

Pulled out the Krylon...

Before:

After:

I wussed out on painting the barreled action, but I've been confirmed as the worlds worst person to be anywhere near paint. That said, I'm happy and I learned a lot... which will be helpful if I grow a pair and do an AR.

 

[waldron1305]

Just sold her today. POF-USA P308 16.5" RECON. Bushnell Elite Tactical 3.5-21x50 G2DMR In a Larue LT111,Timney Trigger, PRS, You see the Rest. Shot Great, didnt shoot more than 150, but was sub MOA and im not the best shot.

 

[indybrad]

Rem 700 in 300 win mag
Shilen #7 contour barrel
Shilen trigger set at 2 lbs
McMillan A5 stock
Badger Ordnance bottom metal
Badger Thruster compenstor
Badger base and rings
Nightforce NXS 5.5-22x50

Built by A.J. Brown

 

[phylodog]

Rem 700 in 300 win mag
Shilen #7 contour barrel
Shilen trigger set at 2 lbs
McMillan A5 stock
Badger Ordnance bottom metal
Badger Thruster compenstor
Badger base and rings
Nightforce NXS 5.5-22x50

Built by A.J. Brown

Nice setup and no doubt it will shoot. I just sent a barrel down to Alan for a cut & thread today. Alan built the most accurate rifle I've owned.

 

[indybrad]

Nice setup and no doubt it will shoot. I just sent a barrel down to Alan for a cut & thread today. Alan built the most accurate rifle I've owned.

I hear that alot about his rifles. Will hopefully get it zeroed this weekend.

 

[42769vette]

I hear that alot about his rifles. Will hopefully get it zeroed this weekend.

ive got a 260 aj did, i rarly shoot groups, but i got a few 5 shot 3.5 inch groups at 750. I cant do better than that, but ive yet to see the rifles limits

 

[avboiler11]

Nice setup and no doubt it will shoot. I just sent a barrel down to Alan for a cut & thread today. Alan built the most accurate rifle I've owned.

Care to share what his charge & turnaround time is for a cut/thread/crown?