NWI INGO General Post part 16

[actaeon277]

that was fun.

Saw Andy, DansGotGuns,and TurnNShoot.
Most of the attendees seemed to be gun people. And ONE anti-gun priest.

There was no ordinance on the docket.
Apparently the priest was there last time asking for anti-gun ordinances.
And, since nothing showed up this time, he decided to stand up at the end and direct questions and accusations at the council.
So then, gun owners, and a FFL dealer got up and spoke.

I mentioned IC 35-47-11, firearms preemption.
Then I mentioned that criminals don't buy their guns from FFLs.
If they did, then most of the gun owners would be okay with going after the FFL that broke the law.
But, all he was doing was going after us legal gun owners.

I guess this guy keeps showing up.

 

[1775usmarine]

that was fun.

Saw Andy, DansGotGuns,and TurnNShoot.
Most of the attendees seemed to be gun people. And ONE anti-gun priest.

There was no ordinance on the docket.
Apparently the priest was there last time asking for anti-gun ordinances.
And, since nothing showed up this time, he decided to stand up at the end and direct questions and accusations at the council.
So then, gun owners, and a FFL dealer got up and spoke.

I mentioned IC 35-47-11, firearms preemption.
Then I mentioned that criminals don't buy their guns from FFLs.
If they did, then most of the gun owners would be okay with going after the FFL that broke the law.
But, all he was doing was going after us legal gun owners.

I guess this guy keeps showing up.

What was the priests name?

 

[chef larry]

What was the priests name?

 

[chef larry]

Don’t know if you guys remember this story from last year or not but here’s the out come.

https://www.newsbreakapp.com/n/0LX5xyJe?s=i0

Probation.

 

[actaeon277]

What was the priests name?

Don't remember.
People told me he's been badgering the council a couple times.

Since there was no resolution or ordinance proposal, I figured going there was a waste of time.
But then at the end, they open up for public comment, and he went up there and spoke.
Failed logic, failed claims.
Then a few "gunners" spoke.

 

[jedi]

did anyone invite said priest to the range to try the evil things he fears?

 

[actaeon277]

did anyone invite said priest to the range to try the evil things he fears?

I'm pretty sure they'd burn his hands.

 

[repeter1977]

Morning all, have a great day. At least I am hoping

 

[Ballstater98]

It would seem all the demons left the family last night. Whew. Rough night.

 

[KLB]

Probation.

What do you think should have happened to him? This wasn't a crime, it was stupidity. Thankfully no one was killed.

He is also now a convicted felon, which means he won't be able to legally own a gun again.

 

[repeter1977]

Finally, a really nice day out and I can enjoy a few minutes of it.

 

[2A_Tom]

Well, I put about 100 rounds through your pistol, Pete.

It fed ball OK. I did not have any jams with it.

When I mixed in Critical Defense and Federal hollow points, I Got 4 distinct jambs.

1. Stuck on the bottom edge of the feed ramp of the receiver. (Critical Duty)
2. Stuck on the bottom edge of the barrel. (Federal HP)
3. Cocked in the chamber.
4. Failure to go completely into battery.

It did not jam on every HP, but every jam was on an HP.

I used 3 different magazines.

1. Chip MacCormack 10 round. (would not insert without depressing the mag release, all 6 of them)
2. Kimber 8 round.
3. Mill Spec.

The problem did not seem to be with the magazines.

I will tear into it again after some thought.

 

[chef larry]

Wet Thursday morning.

 

[repeter1977]

Well, I put about 100 rounds through your pistol, Pete.

It fed ball OK. I did not have any jams with it.

When I mixed in Critical Defense and Federal hollow points, I Got 4 distinct jambs.

1. Stuck on the bottom edge of the feed ramp of the receiver. (Critical Duty)
2. Stuck on the bottom edge of the barrel. (Federal HP)
3. Cocked in the chamber.
4. Failure to go completely into battery.

It did not jam on every HP, but every jam was on an HP.

I used 3 different magazines.

1. Chip MacCormack 10 round. (would not insert without depressing the mag release, all 6 of them)
2. Kimber 8 round.
3. Mill Spec.

The problem did not seem to be with the magazines.

I will tear into it again after some thought.

Cool, thanks. I didn't think it would be the magazines because I tried a couple different ones but back then it always had issues with the loading and chambering. If it ran ball without issues it's already doing better. I don't think I'd ever ran HP through it, mainly because of issues with ball, didn't think HP would run at all.

 

[repeter1977]

Cold rain again. Sadness.

 

[Snapdragon]

Getting a cold or somedamnthing. Coughing, sneezing, chest congestion. Bleh.

 

[actaeon277]

looks like it won't embed.

https://www.youtube.com/watch?v=J9P...rr5byik47nb3gedQnJAmhZWIcFqFPsOPV7xYy1HI53rEs

[video=youtube;J9PtIqOSvzY]https://www.youtube.com/watch?v=J9PtIqOSvzY&feature=youtu.be&t=4066&fbclid =IwAR0-N97uesY3A0rr5byik47nb3gedQnJAmhZWIcFqFPsOPV7xYy1HI 53rEs[/video]

 

[chef larry]

Getting a cold or somedamnthing. Coughing, sneezing, chest congestion. Bleh.

Cooties.

 

[2A_Tom]

Grandstander!

 

[actaeon277]

yes I am.