THE CZickness LI.....Shooting for a Summer to Remember

[Creedmoor]

I picked up a stainless Para P14 off GB a while back and it hasn't had a single issue. Picked another up out of the classys here and it really burnt me. If they have "Made in Canada" on the frame, they are ones to get. The first one I got did. The second one didn't. Big difference in the quality of the two.

Thats interesting, I bought two Canadians new. A P18 limited SS and a P14 limited SS.
One has had new Wilson insides put in it, and the other one needs to.
Over having sear failures.
Great pistols, but its like carrying a thick wall 8" cinderblock on your hip.
I need to get it to Ray Saltsman.

 

[hANNAbONE]

Hello my Weekend friends of all that is Steel & Wood.

Hope your Sunday is a Gunday

The world is a changin' - stay strapped, Lads.

 

[88E30M50]

Working on flooring today. I'm am almost past the PITA closet area that requires just about every piece be custom cut in multiple directions. Normally, my carpentry skills make use of caulking for the final fit, but I've not been able to find any caulk that can fill a 2 1/2" gap. So, a cutting I go.

 

[Bennettjh]

I bet that you had a blast !
Those type of engines are so crazy .... things that burn 16 gallons to the mile. Love 'em

It was awesome. They get them started on alcohol, then switch a valve over to nitro. That's when the fun happens.

 

[drillsgt]

Still in Wisconsin but less than two weeks left, i've got some shooting to do when I get back. I have that Echelon I need to shoot, a Weatherby Mark V Hunter sitting at my dealers and this Seekins Havak 6.5 I found a great deal on.

 

[Ruger_Ronin]

Evening all. Been a productive day.

Just in from MIL's estate. The deeper we get into the property, the worse it gets. I have about 2k lbs of cinder blocks on my trailer, about half the lot. Random piles of them. 1 rolloff load ready (yes another full one), maybe another 3/4 load to finish the job. I ran a saw for several hours as well. Much to burn, too windy today. I'm finishing this Corona and his brother before I even attempt the unloading.

 

[ditcherman]

Yep

View attachment 291343

The Holosun in this picture confuses me.

 

[MindfulMan]

If everyone does their job, this magnificent (ahem) shooter will be mine tomorrow !

Crosman P1377BR American Classic Variable-Pump .177-Caliber Pellet Air Pistol




I'm going to try using this pistol on my target, instead of mounting a scope on the air rifle. I'll probably have to move a bit closer .... as long as it's in the shade !

 

[zachcz]

Well I did a thing. I don’t typically care for Cajun stuff but wanted to try in a polymer framed omega. All my experience is in the classic 75 metal framed stuff.

Not sure what’s all installed and what’s not. Probably be my project this week. Trying to decide if I wanna take it all out or put it all in. Supposedly there was something not ordered for the short reset kit and it for sure wasn’t installed. This sound / look familiar to any of you Cajun fans

Next goal is to get the kadet kit for it.

 

[Benp]

Well I did a thing. I don’t typically care for Cajun stuff but wanted to try in a polymer framed omega. All my experience is in the classic 75 metal framed stuff.

Not sure what’s all installed and what’s not. Probably be my project this week. Trying to decide if I wanna take it all out or put it all in. Supposedly there was something not ordered for the short reset kit and it for sure wasn’t installed. This sound / look familiar to any of you Cajun fans

Next goal is to get the kadet kit for it.

View attachment 291485

View attachment 291486

I love the P07. It looks like you have the short reset kit unless there is something missing out of it. I Cajunized mine using the Pro kit and I love it. At some point I want to have it milled for a red dot, but not right now. A very enjoyable pistol!

 

[Born2vette]

Morning friends. No clue why I am up this early but going with it.

 

[mcapo]

Morning friends. No clue why I am up this early but going with it.

Best worms?

 

[wtburnette]

 

[DadSmith]

Good morning INGO.

 

[Leadeye]

Bad weather went north and south of the GSF, on generator, but no damage.

 

[llh1956]

Well I did a thing. I don’t typically care for Cajun stuff but wanted to try in a polymer framed omega. All my experience is in the classic 75 metal framed stuff.

Not sure what’s all installed and what’s not. Probably be my project this week. Trying to decide if I wanna take it all out or put it all in. Supposedly there was something not ordered for the short reset kit and it for sure wasn’t installed. This sound / look familiar to any of you Cajun fans

Next goal is to get the kadet kit for it.

View attachment 291485

View attachment 291486

Hi Zach, What I see missing is the roller bearing. You will need to measure the OD of the stock roller bearing and order one that is the next size larger. It will help smooth the DA!

 

[Firehawk]

Good morning CZickos,

Took the day off work to celebrate our anniversary.

 

[Firehawk]

Well I did a thing. I don’t typically care for Cajun stuff but wanted to try in a polymer framed omega. All my experience is in the classic 75 metal framed stuff.

Not sure what’s all installed and what’s not. Probably be my project this week. Trying to decide if I wanna take it all out or put it all in. Supposedly there was something not ordered for the short reset kit and it for sure wasn’t installed. This sound / look familiar to any of you Cajun fans

Next goal is to get the kadet kit for it.

View attachment 291485

View attachment 291486

Will you also be removing the rail?

 

[patience0830]

Best worms?

Talking worms with the medical staff may get you some stories.

 

[zachcz]

Will you also be removing the rail?

I would if I could easily and make it look half way decent. I hate rails.