Great load for white tail.243 with 85 gr. barnes tsx. 45.5 gr of hodgdon superperformance powder cronos 3220 and 1/2 groupes at 100yrds out of a t/c compass
I have the same pistol but don't load 147's. I worked up a load with 125 gr TC Blue Bullets. 3.5 grains of TG and below created cycling issues. I eventually settled on 3.9 though I did run about 1000 rounds through it with 3.8. They ran fine.Been working on some low recoil 9mm rounds using 147gr Hi-Tek Hoosier bullets and Titegroup. Think I've settled on 2.7gr and 1.14 OAL. 2.6 worked but at 2.5 I started having cycling issues with my M&P 2.0 9mm Compact.
Powder valley has had some latelyLoaded up 150 rounds of 9mm 124gr last night. In serious need of more WSF Powder though.
Thanks for letting me know. I just checked and they are out of stock currently, but will keep that site in mind to see if they get some more in stockPowder valley has had some lately
I did a similar load last week with some of the Hoosier 124gr hi-tek. I used 3.8gr of TG with an OAL of 1.125I have the same pistol but don't load 147's. I worked up a load with 125 gr TC Blue Bullets. 3.5 grains of TG and below created cycling issues. I eventually settled on 3.9 though I did run about 1000 rounds through it with 3.8. They ran fine.
Its kept me shooting for the past year and a half. Even at the current $100(ish) box of primers that have recently started trickling in I am coming in cheaper than factory ammo prices and thats if you can even find the stuff still.After looking at current pricing, I may be pulling 9mm components out of storage for reloading.
If it wasn't for my reloads I would have been done shooting a year ago. Since then I've put 8-10k reloads down range. I am not sure what this winter will bring me as I have less than 5k primers left and haven't been able to score any.After looking at current pricing, I may be pulling 9mm components out of storage for reloading.
I also prefer Federal but will use CCI and Winchester. Heck right now I'm working through 5K of some off brand. They seem to be fine though I do occasionally have one that seems tight. Could be the casing, could be a little lack of tight manufacturing tolerances on the primer's end.What's your price range? I'm looking for the same thing (as well as some more SRPs) and I'll let you know if I find any
Personally prefer Winny or Federal, not a big fan of CCI but might have to go there. I would pay a little more for my usual choices
Understood. I'll let you know what I see when I'm out this wkndI also prefer Federal but will use CCI and Winchester. Heck right now I'm working through 5K of some off brand. They seem to be fine though I do occasionally have one that seems tight. Could be the casing, could be a little lack of tight manufacturing tolerances on the primer's end.
I forgot the name, Fort Smith or something like that.
I'd like to be $0.10 for Federals.