If thread jacking was against the law, we'd all be in jail.Talk about thread hijacking.....
The OP specifically said he was not asking about 1911 style pistols..
Real entertaining though. Thanks for all the info.
Regards
Can't hardly let the gentleman that pointed out he was running around in condition 2 do it without letting him know he is not safe;
Condition Two is problematic for several reasons, and is the source of more negligent discharges than the other conditions. When you rack the slide to chamber a round in the 1911, the hammer is cocked and the manual safety is off. There is no way to avoid this with the 1911 design. In order to lower the hammer, the trigger must be pulled and the hammer lowered slowly with the thumb onto the firing pin, the end of which is only a few millimeters away from the primer of a live round. Should the thumb slip, the hammer would drop and fire the gun. Not only would a round be launched in circumstances which would be at best embarrassing and possibly tragic, but also the thumb would be behind the slide as it cycled, resulting in serious injury to the hand. A second problem with this condition is that the true 1911A1 does not have a firing pin block and an impact on the hammer which is resting on the firing pin could conceivably cause the gun to go off, although actual instances of this are virtually nonexistent. Finally, in order to fire the gun, the hammer must be manually cocked, again with the thumb. In an emergency situation, this adds another opportunity for something to go wrong and slows the acquisition of the sight picture.
The Sight 1911 Conditions of Readiness Page