So let me say this isn't my first 700 and there's a bit of a catch. You see I recently picked up 700 in 300wm built by a company called howder arms. As its explained the action is trued and blueprinted then thrown into an xlr chassis. I really like this gun and it handles well. I've shot it some but not enough to get a load worked up, I checked the trigger on it and it was consistently pulling 4.3lbs, it's not a bad trigger I don't find myself jerking it but I had a Jewell hvr preset at a pound in my last one. My father had a few 700s and he has timneys in them, honestly I couldn't tell a difference between my Jewell and his timney except his timney had a fatter trigger which I found nicer. So which would you guys choose and why? I'm thinking timney this time because there a little cheaper. I should note the biggest catch of all is that I noticed the action is bedded to the chassis so I'm kind of hesitant to pull it apart. Any thoughts ? Another thing is I notice brass is hard to come by I'm looking at ordering a 100 pieces of nosler unless someone has better suggestions