Yep. That's the pic I had in mind.
Yep. That's the pic I had in mind.
No worries. I was mostly busting your chops.I plan on putting that wiring in conduit eventually. The large white wire is only a ground, for what it's worth. The small pair of wires are 12V for the tachometer.
Good advice on the shielding. Have seen that put into use in my line of work. Every once in awhile I'll see an erratic RPM on the tach while adjusting the speed with the VFD, but it's usually just a quick 100 extra RPM or so blip, so it isn't an issue currently.No worries. I was mostly busting your chops.
FWIW, there isn't anything terribly wrong with this installation. Conduit isn't necessary since you're using SJ cable, but you might consider wrapping some green tape around the ends of the ground to clearly identify it as the ground.
The code also allows you to run low-voltage control conductors that are associated with a motor along with the motor feed conductors. However, if you start to get some weird results, it may be due to the AC signal bleeding into the low-voltage signal. If this happens, using a shielded control cable should eliminate the problem.
@MindfulMan
As a token of my gratitude for our friendship, I made this for you today. My first full on official wood burning project. It's on a piece of 3.5" x 6" maple, the same material I made my first grips from (for the H&R 22). The 3rd coat of polyurethane is curing currently. If we don't see each other at SGE, whenever that is, I will ship this to you. I hope you like it, because I sure do.
*Like us, it isn't perfect, but it does have some character.
View attachment 271504
View attachment 271505
That is awesome! Can we shoot it with Brutus?@MindfulMan
As a token of my gratitude for our friendship, I made this for you today. My first full on official wood burning project. It's on a piece of 3.5" x 6" maple, the same material I made my first grips from (for the H&R 22). The 3rd coat of polyurethane is curing currently. If we don't see each other at SGE, whenever that is, I will ship this to you. I hope you like it, because I sure do.
*Like us, it isn't perfect, but it does have some character.
View attachment 271504
View attachment 271505
I hit 40,000 messages with my new username. Damn I've been here too much lol
I just found the actual translation:What’s the translation for nutzwacker?
I've seen you shoot before, I don't think the plaque has anything to worry about.That is awesome! Can we shoot it with Brutus?
I've seen you shoot before, I don't think the plaque has anything to worry about.
I bet TT knows....Wonder where this came from?
I picked her up with my hands, and held her until she got ahold of a twig to get on the tree she finally went up it.Morning DS
Your snake picture is giving me the heeby jeebies.
Want some more?Morning DS
Your snake picture is giving me the heeby jeebies.