Shotgun Show and Tell

[Jtgarner]

Both have their advantages and disadvantages. I like my 500, but the 870 is better for some.
As far as the safety goes, I hated the flat safety on top of the 500 when I put that stock on, so i got a bigger safety to enable me to reach it with my hand still on the grip.

 

[TheUziButton]

 

[holtkampaj]

very nice guns all

 

[ammoguy62]

Saiga

M50 barrel shroud

 

[Lock n Load]

M50 barrel shroud

Looks good, very fitting for a shotty !!! The stock looks good too...

 

[ammoguy62]

Before and after

 

[tradertator]

Don't think I've posted this one yet.

 

[stack23]

Don't think I've posted this one yet.

wow that thing is mean looking

 

[mammynun]

Don't think I've posted this one yet.

Great minds...
The rear sight on my Chaos would vibrate loose... i.e. the silver bolt that holds the elevation drum would back out which would cause me to shoot high. I fixed it with loctite. IF you have that problem, be VERY careful taking it apart! There are 2 small springs that push two small ball bearings into the detents on the sight base. They are VERY small.Putting it back together was one of the most frustrating gun related things I've done in a while! There's probably a technique that makes it easier, but I never figured it out... glad I didn't loose any of the pieces.

I'd highly suggest you get the Magpul riser fo your stock; the 3/4" one gave me a perfect cheek weld with the Chaos. Best <$20 part on the gun.

 

[tradertator]

wow that thing is mean looking

Thanks, it's a real crowd pleaser when I get together for gun-social events.

Great minds...
The rear sight on my Chaos would vibrate loose... i.e. the silver bolt that holds the elevation drum would back out which would cause me to shoot high. I fixed it with loctite. IF you have that problem, be VERY careful taking it apart! There are 2 small springs that push two small ball bearings into the detents on the sight base. They are VERY small.Putting it back together was one of the most frustrating gun related things I've done in a while! There's probably a technique that makes it easier, but I never figured it out... glad I didn't loose any of the pieces.

I'd highly suggest you get the Magpul riser fo your stock; the 3/4" one gave me a perfect cheek weld with the Chaos. Best <$20 part on the gun.

Haven't had any trouble with my sight yet, knock on wood. And you couldn't be more right about the riser. I'm holding out on one so I have an excuse to go to the October 1500. The only thing left is a porkypine or too maybe chop the barrel down and perm. affix. a Red Jacket suppressor . I'd hate to lose that Wart Hog brake, so it looks like the porkypine is most likely.

 

[watkins1988]

keep it simple

 

[Lammchop93]

My 887 Nitro Mag and my Westernfield 128 fr

 

[ammoguy62]

Saiga triple

410 & 20 with M50 barrel shroud

Saiga 12 with M50 barrel shroud

If only I had three hands

 

[whiteman]

Ithaca 37 English

When I was 18 I purchased an Ithaca model 37 in 16ga. with a vent rib. I had to sell it to help pay for Andrea's books when she started her masters program. Only took me 27 years to find a replacement, but it was well worth the wait! Found this at Cabelas 99% in the box with vent rib, english stock, upgrade wood and checkering. Want to hunt with it but may just put it away in the safe

Uploaded with ImageShack.us

 

[nate77]

Finally finished up my pump gun.

Remington 870 Express Tactical, it came new with a Speedfeed IV, I added a Scattergun Tech +2 extension, Elzetta Light mount, and StreamLight Polytac LED Light.

 

[OneBadV8]

Just got this one from Tactical Shotgunner!

Winchester SX3 I'm putting in an order for a speed bolt and a 6-shot extension tube for it

 

[Slade]

Ithaca 37's

I had the safe open today and snapped a pic of my Ithaca's. Both slam fire. One is labeled as D.S. Police Special.

 

[Slade]

Benelli M4

 

[OneBadV8]

Just finished my 870

And Here is my SX3 with a +6 Extension and Speed Bolt installed

Close up of the bolt

 

[shavedforbattle]

MOSSBERG 500