Rebel Jack
Marksman
I have 3 Glock slides with an RMR cut from 3CR (the Trijicon cut is the only cut they offer) that I'm hoping to mount Vortex Vipers on. Looking for an individual or Machine shop that could mill adapters for them. The issue with adapters available online, is that they either mount via the rear dovetail, or are drilled in such a way that the rear dovetail is obstructed by the optic. If the adapter results in the optic being flush with the top of the slide and this causes the sights to not co-witness (due to the optic length being longer than the sight cut), the sight cut may need to be lengthened slightly. Not sure if that's possible or necessary without seeing the optic mounted first. I'm paying either way.
Has anyone heard of a shop that may be willing to do this?
As an aside, the Slides are for the 26,19 and 17 respectively. In the off chance that means anything.
Has anyone heard of a shop that may be willing to do this?
As an aside, the Slides are for the 26,19 and 17 respectively. In the off chance that means anything.