I did notice there's some creep in DA once the cylinder has locked on the chamber. I'll probably take it apart and find what's dragging and smooth it out. Otherwise the trigger is very nice...
I found the mainspring screw can be almost completely backed out, just enough contact to prevent the spring from shifting, and there's no issues lighting off Winchester primers. I've got the single action down to about 2.5 lbs, it's to light for me so I'll bump it up a little. But, doing an inspection during the teardown for its first bath, I found drag marks where the hand goes through the frame window. Couldn't find any other out of the ordinary wear so this must be where I'm finding a little creep in DA.
Accuracy is quite impressive with this revolver. Here's 10 shots at a 50' slow fire B2 target, the pistol was resting on the bench. I need some new glasses that allow me to actually see the front sight...