mmpsteve
Real CZ's have a long barrel!!
View attachment 218892
Here is some AllenM custom 2011 in 10mm to keep this thread moving…
One teaser pic. Really?
.
View attachment 218892
Here is some AllenM custom 2011 in 10mm to keep this thread moving…
I read that Tanfoglio parted ways with EAA, and that resulted in the Witness line being dropped from U.S. import.
I also read that another importer may have picked up the Witness line.
Can't recall the name.
The 10mm Auto is designed to run hot with a max pressure of over 44,000 psi, more than the .44 mag.
Designed for semi-auto handguns, the 10mm is roughly equivalent to the .41 magnum, ballistically speaking.
A favorite of handgun hunters, the big round is gaining favor with the self-defense market.
"10mm Auto loaded with 135 grain hollow point bullets with a muzzle velocity approaching 1,400 fps (as loaded by CorBon)" sounds a bit under powered compared to what Underwood sells.The Most Deadly Handgun Cartridge You Can Buy For Self-Defense
For many years now there has been a debate among handgun owners as to what the single most effective self-defense handgun cartridge is. It was a very valid debate when the choice was limited to the 9mm Parabellum and the .45 ACP. But prompted by tragedies within law enforcement, the debut of...www.offthegridnews.com
Interesting article about the 10mm
Need penetration get a 10mm.
Well, you've gotta pre-emptively buy extras, because it's always the 10mm sockets that get lost!I’ve got a good seven or eight craftsmans in standard and deep well…At least four or five snap ons in standard
And deep well…And a couple two or three that the names don’t stick out to me now they were cheap when I needed them. I also have prolly close to the same amount in wrenches by the same manufacturers as I buy kits. Never know when you’ll need a good 10 mil socket or wrench!!!
Need penetration get a 10mm.
I’ve got a good seven or eight craftsmans in standard and deep well…At least four or five snap ons in standard
And deep well…And a couple two or three that the names don’t stick out to me now they were cheap when I needed them. I also have prolly close to the same amount in wrenches by the same manufacturers as I buy kits. Never know when you’ll need a good 10 mil socket or wrench!!!
I forgot to actually list the 10's.
Currently have:
Smith 610
Gen 3 20
Gen 4 40
Post 2015 delta elite
Have had:
Tanfoglio Witness Hunter (tell me there's a better sounding name for an Italian Mafia gun)
Springfield XD
Gen 4 29
Frankenstein ar
10mm is best mm.