I stripped mine the first time I tried to install a RMR. My gunsmith took a slightly bigger torx bit, tapped it in lightly with a hammer and was able to remove it in 10 seconds.Last night I attempted to put the optic on my hellcat pro and the screw stripped with making no more of an attempt to determine the size of torx/Allen wrench. Did nothing more than. I attempted on the other screw that worked fine. This sucks.
TIA
These were the OEM screws to take the piece off.I stripped mine the first time I tried to install a RMR. My gunsmith took a slightly bigger torx bit, tapped it in lightly with a hammer and was able to remove it in 10 seconds.
In the future I have always used screws from a company called Battlewerx, never the OEM screws. Things may have changed but in the past OEM screws were softer. Also make sure you use a newer, quality torx bit.
So this was just trying to get the optic cover plate off.These were the OEM screws to take the piece off.