This makes me wonder if you don't have some sort of obstruction. Are you able to easily access the gas path around the oven to be sure nothing got lodged there? If not, maybe wait for some colder outside temps to see if your draft improves before attempting any in depth investigation/cleaning.So I called them today… they said it is from a cold chimney and sent me an instructional video on how to light the stove. I had a feeling it wasn’t going to work but I figured I would do it EXACTLY how they said.
It did not work.
The only thing I thought could have changed was….. I used some cardboard to light a fire one day instead of just the torch and kindling? I thought maybe that a flame had lodged itself in the way… but I ran a brush the full chimney length and stuck my arm vacuum and brush up around the oven to dislodge anything in the gas route.
I really thought we were onto something with the baffle since I most likely have bumped that loading the firebox too full.
Awesome that you found it. I'd be sure to clean all around the oven gas path. It might require some disassembly to get everything cleared out. Good luck.Welp…. Who had their $$ on obstruction? 100% blockage right on top of the oven. Chimney was clear, now I know. I really appreciate all the advice offers and quick responses in my extremely stressed out state of mind. Have a great day everyone
Yeah I have cleaned everything except that spot very well. Because I didn’t want to scratch up the black chimney taking it apart but now I see that spot will need special attention because of the oven I am sure. But I also bet with a proper chimney brush it would clean that spot from the top.Awesome that you found it. I'd be sure to clean all around the oven gas path. It might require some disassembly to get everything cleared out. Good luck.
I'd invest in a firewood moisture tester to be sure you only burn well seasoned wood. Your stove might be more prone to creosote buildup because of the more complicated gas path. Well seasoned wood will definitely cut down on cleaning frequency, and smokey Christmas Eves. Lol.Yeah I have cleaned everything except that spot very well. Because I didn’t want to scratch up the black chimney taking it apart but now I see that spot will need special attention because of the oven I am sure. But I also bet with a proper chimney brush it would clean that spot from the top.
I don't know about meter brands or models. I just ordered one with a healthy number of good ratings.Noted proper chimney brush is ordered from Amazon next is moisture meter any that are better than others??
I don’t buy the wood I have stacks and stacks here. Maybe I just need to cover it better? It is split and stacked and off the ground. I’m gonna build those pallet wood sheds like you guys showed on here.
I strongly suggest you invest in this inexpensive accessory. It will help you reduce the amount of creosote that you produce.I feel it maybe a combo damp wood, restricted gas path, oven making cleaning difficult and collecting crap, smoldering fires because of outside temps, and in general being a novice.
Now that I know the stoves weakness I will be ok. Hopefully mitigating some of the other issues reduces the problem but it is clearly a problem area…. May explain why this one was 4k cheaper than the bun baker xl with the lower oven…. Live and learn.
I actually have 2 on mine . One on the pipe and one flat on the stove . Even though I know how my stove burns , I still rely on these to maintain proper adjustments .I strongly suggest you invest in this inexpensive accessory. It will help you reduce the amount of creosote that you produce.
View attachment 321559
It has a magnet on the backside and you attach it to the chimney pipe just above your stove. Very handy.
I don't put mine on my stove pipe because it's double wall dvl and wouldn't give you accurate flue temps. I have one on top of the stove and one on the back side of my cast flue outlet because i have room there. And yes, learning your stove is key, and sometimes takes a little while.I actually have 2 on mine . One on the pipe and one flat on the stove . Even though I know how my stove burns , I still rely on these to maintain proper adjustments .
Mine usually stays around the 550 mark ...........
As is mine, up to the wall. Then double wall to the outside and up.My pipe is single wall right out of the stove.
I tried having a fan like that by mine and it smelled kind of melty plasticMy set up ................Looks like it is burning around 550 degrees here .....My pipe is single wall right out of the stove .
View attachment 321667
Burning around 600+ on this day ...........
View attachment 321669
When you said you has no flue do you mean you run your stove pipe into a brick or block chimney that doesn't have a flue/liner?Honestly I can’t get a fire to last….. I shut the door because smoke is coming in and the fire goes out
And I had no issues for the previous month
So I thought the flue was the adjustment on the chimney itself to adjust exhaust side…. I do not have that I only have an air intake adjustment. I believe my terminology is as lacking as my stove skills at this point.When you said you has no flue do you mean you run your stove pipe into a brick or block chimney that doesn't have a flue/liner?
As you stated earlier you need to fix that asap.
Is it's metal chimney pipe all the way up and out of the house?
If so have you used a chimney brush to clean it yet? I clean mine every two weeks.