Hat handguns are better suppressor host? I ask because my LGS took me out yesterday to look at the Dead Air Mojave 9. Nice suppressor but he rolled it onto a Glock 19 and that wasn’t impressive. Looked/felt like the pistol was overworking itself trying to run. Thanks!!
Wait, you have to lube a glock? I thought they were meant to squeek when the slide was worked?What do you mean by overworking itself? Beating itself to death or not cycling properly?
This is a difficult question to answer without lots of info. Recoil spring weight, ammunition, are just two of the things that play major rolls in how reliable things can be with suppressed firearms. In my experience, fixed barrel handguns run the most reliably without any need for modification but they are the least seen hosts. As handguns are recoil operated, the discussion for backpressure isn't warranted here. What is, is the fact that suppressors rob you of some of the needed recoil for your firearm to function properly. Addressing why and how much recoil is lost will help determine how to fix it. Assuming the gun ran fine before the addition of the suppressor. Here are just a couple things to consider.
Ammo: If the ammo isn't "hot" enough, your gun wont function. Solution, get "hotter" ammo or drop the recoil spring weight.
Lubrication: If the gun isn't clean or properly lubed, the amount of friction present upon moving parts will be greater than the amount of energy available to move them. Combined with the spring weight, this may be a cause for reliability issues.
Neilson Device/Booster: Make sure it's clean an lubed.
The physics is most often forgotten when it comes to suppressors. In general, you are adding something that is 5-8 inches long and about 6-14 ounces in weight onto the end of a barrel of a system that was most likely NOT DESIGNED to function as such. By adding a suppressor your are in turn increasing the amount of energy needed to unlock the pistols mechanism, and this is even before the energy of the recoil spring comes into play. This is not a simple topic to cover and I could go on and on about it. I hope the little bit of info I've offered has been helpful.
Lol. You are the one that brought lubrication into the thread.lol, this is a discussion about suppressed guns! I can give you my thoughts on lubrication and glocks in a different thread if you like!!
Who's on 1st?Lol. You are the one that brought lubrication into the thread.
Lol. I'm just busting your balls, I'm old enough that my first can had swipes in it.Who's on 1st?
Suppressor host = lube
No suppressor = Sahara desert dry
When it comes to ammo, in my experience, most 115gr and 124gr seem to always work with OEM guns
147gr starts to be hit or miss
150gr+ seems to only function with guns that have been "tuned"
I'm getting old enough to where I'm gonna need wipes!Lol. I'm just busting your balls, I'm old enough that my first can had swipes in it.
Don't make me laugh to hard..I'm getting old enough to where I'm gonna need wipes!
Hello, thanks for your reply. The Glock sounded like it was beating itself to death.What do you mean by overworking itself? Beating itself to death or not cycling properly?
This is a difficult question to answer without lots of info. Recoil spring weight, ammunition, are just two of the things that play major rolls in how reliable things can be with suppressed firearms. In my experience, fixed barrel handguns run the most reliably without any need for modification but they are the least seen hosts. As handguns are recoil operated, the discussion for backpressure isn't warranted here. What is, is the fact that suppressors rob you of some of the needed recoil for your firearm to function properly. Addressing why and how much recoil is lost will help determine how to fix it. Assuming the gun ran fine before the addition of the suppressor. Here are just a couple things to consider.
Ammo: If the ammo isn't "hot" enough, your gun wont function. Solution, get "hotter" ammo or drop the recoil spring weight.
Lubrication: If the gun isn't clean or properly lubed, the amount of friction present upon moving parts will be greater than the amount of energy available to move them. Combined with the spring weight, this may be a cause for reliability issues.
Neilson Device/Booster: Make sure it's clean an lubed.
The physics is most often forgotten when it comes to suppressors. In general, you are adding something that is 5-8 inches long and about 6-14 ounces in weight onto the end of a barrel of a system that was most likely NOT DESIGNED to function as such. By adding a suppressor your are in turn increasing the amount of energy needed to unlock the pistols mechanism, and this is even before the energy of the recoil spring comes into play. This is not a simple topic to cover and I could go on and on about it. I hope the little bit of info I've offered has been helpful.
I honestly can’t tell you what they were using. First few rounds were super sonic and the last few he grabbed were subsonic.Noble, what ammo were you guys shooting?