Everything is FTF in Muncie, Dalville area or $5.00 shipping.
The Hornady Cam-Lock Case Trimmer features a micro-adjustable cutter that allows for change in length in increments of 1/1000" without moving the case. The one finger case cam lock secures the case in place with just a touch, another touch is all that is needed to release the case. All trim lengths are measured from the head of the cartridge. Large diameter, replaceable cutting head trims cases up to .50 caliber in diameter with a tall frame to prevent banging knuckles on the bench.
The Hornady Cam-Lock Case Trimmer Chamfer and Deburring heads allow any reloader utilizing the Hornady Cam-Lock trimmer to turn it into a chamfer and deburring tool.
Four Hornady shell holders 10, 30, 32 & 44
Ten pilots 1, 3, 6, 7, 9, 15, 18, 19, 21 and 50
$75.00
New Lee 2-Cavity Bullet Mold TL358-159-SWC 38 Special, 357 Magnum, 38 Colt New Police (358 Diameter) 158 Grain Tumble Lube Semi-Wadcutter $15.00 SOLD
New Euroarms brass muzzle loader mold looks to be 38 cal also it checks .357 across bullet cavity $25.00
Lee Pro 4 20 Lb Furnace 110 Volt
An extra-large, 4" diameter pot with 20 lb capacity. Features a long life 700-watt tubular heating element to assure quick melting and rapid recovery and a remote sensing thermostat. The convenient, bottom-pour design features a micro adjustable flow control valve that can be fine-tuned with a screwdriver, and the front-mounted, replaceable valve spout allows instant reseating. Generous 4" of clearance under the spout to accept all brands of bullet molds and most sinker molds. Adjustable mold guide included.
The one on the left is taller and has an adjustable mold guide. Both work fine.$40.00 each SOLD
The Hornady Cam-Lock Case Trimmer features a micro-adjustable cutter that allows for change in length in increments of 1/1000" without moving the case. The one finger case cam lock secures the case in place with just a touch, another touch is all that is needed to release the case. All trim lengths are measured from the head of the cartridge. Large diameter, replaceable cutting head trims cases up to .50 caliber in diameter with a tall frame to prevent banging knuckles on the bench.
The Hornady Cam-Lock Case Trimmer Chamfer and Deburring heads allow any reloader utilizing the Hornady Cam-Lock trimmer to turn it into a chamfer and deburring tool.
Four Hornady shell holders 10, 30, 32 & 44
Ten pilots 1, 3, 6, 7, 9, 15, 18, 19, 21 and 50
$75.00
New Lee 2-Cavity Bullet Mold TL358-159-SWC 38 Special, 357 Magnum, 38 Colt New Police (358 Diameter) 158 Grain Tumble Lube Semi-Wadcutter $15.00 SOLD
New Euroarms brass muzzle loader mold looks to be 38 cal also it checks .357 across bullet cavity $25.00
Lee Pro 4 20 Lb Furnace 110 Volt
An extra-large, 4" diameter pot with 20 lb capacity. Features a long life 700-watt tubular heating element to assure quick melting and rapid recovery and a remote sensing thermostat. The convenient, bottom-pour design features a micro adjustable flow control valve that can be fine-tuned with a screwdriver, and the front-mounted, replaceable valve spout allows instant reseating. Generous 4" of clearance under the spout to accept all brands of bullet molds and most sinker molds. Adjustable mold guide included.
The one on the left is taller and has an adjustable mold guide. Both work fine.$40.00 each SOLD
Last edited:
