Jennings = the only pistol more likely to explode then a Glock!!!
Bryco, Jennings, Jiminez: these are all bad things.
Are you selling a Jennings? Your post is a little confusing.
It looked more like an attempt to offer a trade outside of the classifieds prior to attaining 10 posts by prefixing with a somewhat unrelated question.
Is this similar to the hi-point bashing? Wonder how many here have actually had a Jennings.
Is this similar to the hi-point bashing? Wonder how many here have actually had a Jennings. I have owned both and both have functioned fine.
... I think you'll have a hard time moving a Jennings here or on any other gun board; the brand is almost universally despised, and for good reason...
.
You might try selling the ammo, and giving away a free pistol with it.
I've often wondered why it's accepted and okay for a Kel Tec to require fluff and buff to properly operate, but jennings seem to be judged "out the box".
I'll agree and say I'd never go out of my way to get my hands on a 9mm or 380 jennings/bryco/raven/whatever but if I got one for trading two boxes of ammo you can bet I'm going to strip the gun and make sure everything's worked over properly so I can add it to my range bag.
I've got a Jimenez (most recent name for Jennings) JA-22 that's stamped Jennings J-22 under the grip. Out the box it wouldn't even manually cycle federal bulk .22. I dug around the internet and found a forum dedicated to Saturday night specials that had a good writeup on fluff n buff.
This was the first gun I ever purchased, I got it for 105 out the door. I knew nothing about firearms prior to this gun. I'm a part time mechanic by hobby and trade because it comes natural to me. My main job is working in the operating room, but I digress. I was a little wary of taking the gun apart. Once I did, I found rough corners from a poor casting job. The metals were subprime zinc alloy and overall I could tell it wasn't a quality gun, but I was convinced I could get it to work by messing with it.
I broke out some sandpaper and small tools, completely stripped the gun and polished all contact surfaces. I polished the feed ramp, cleaned everything as best I could and reassembled. The first time I took it to the range I got several FTE, then somebody suggested I try high velocity rounds. I bought a box of CCI minimags and never had a problem since.
The gun came with a lifetime warranty from Jimenez. I don't know what's going to happen when the company switches hands again, but they replaced the slide free of charge when it began to wobble at ~2500 rounds of cci mini mags. I think part of this was overaggressive polishing on my end. I've ran another 1500 rounds through the gun with no problems.
Yes, it's cheap. But I bought it as my first gun, it lived its life, up until a few weeks ago when I bought a p3at, as my backup gun. When i bought it price was a major factor and the lifetime warranty sold me. Like I said, I knew nothing of firearms having grown up in an anti gun home, and living in and around Chicago where good guys dont have guns. I bought it after a string of events including a carjacking, home invasion, garage burglary, mugging and being a witness to a gas station robbery. I didn't have the money for something bigger or better.
All the forums with exception of the SNS forum is full of people who bash on this type of gun. You do realize the court case that shut them down was won because the gun required the safety to be off and the trigger to be pulled in order to strip the gun. I've got a springfield that requires the same.
At this point, owning several firearms that are of greater caliber and out the box reliability than the Jennings I no longer need the SNS, but I don't understand the bashing of the brand and type of gun that was produced by these companies. They're tarnished because of their price and probably because of this they are used in more crimes than the high dolar firearms. However, they serve a purpose, to arm those with limited means. No, they're not great guns and you probably should not carry one with a round in the chamber due to their design (I never carried with one in the chamber) but what's thrown me for a loop is that the Keltecs have a solid following despite requiring the same procedure to have a reliably functioning handgun.
Not to mention, they're produced entirely in the United States.
/rant
Cliffs: I have a J-22 with several thousand rounds that's functioned reliably and don't understand the constant bashing of the brands.