AR-15 and M-16 Show And Tell

[LEaSH]

MGI ? Hmmm. I dig their offerings. I'll be looking at that .45acp set up very close.

 

[TheUziButton]

THE set up to get would be that lower with a gas impingement upper. GI has a much lighter recoil vs the blow back systems.

MGI ? Hmmm. I dig their offerings. I'll be looking at that .45acp set up very close.

 

[Tombs]

Finally got my build finished up, can of M855 dropped on my doorstep today too!

 

[jblomenberg16]

I believe he burnt his index finger on asuppressor that day so he had to resort to using his middle finger.

I've also heard that some folks have discovered that one can pull the trigger faster with the middle finger than index finger. This seems to be supported by many paintballers that do the same time.

 

[Principal Skinr]

Sorry the pic isn't too good. This is my hog blaster. It has a Stag Arms lower, Spike's 16" carbine upper, MOE furniture, an Eotech EXPS 3 sight with a Primary Arms 5x magnifier on a flip mount. The pic shows a mount for my Fenix TK15 light. I swapped a gen III night vision device for the 5x magnifier and killed a 200 pound hog on a moonless night! I used a Federal round with 55 grain Barnes TSX bullet. It hit him in the left shoulder blade and punched right through. He ran about 20 yards and fell on his face.

It is light, points fast, and dead-on accurate.

 

[Jtgarner]

Finally got my build finished up, can of M855 dropped on my doorstep today too!

This would be even more beautiful with a set of Dueck Defense Offset Iron sights on it

 

[jblomenberg16]

Finally got my build finished up, can of M855 dropped on my doorstep today too!

Who makes the upper? Been thinking of an 18" SPR ish build myself, and have been eyeing the BCM upper with similar VTAC rail.

 

[Tombs]

I'm pretty handy with magnification at indoors distances.

I was considering something like that though! No clue what it currently weighs but it seems obscenely light for what it is. Could certainly still afford weight for a delta point on a 45 degree mount.

Who makes the upper? Been thinking of an 18" SPR ish build myself, and have been eyeing the BCM upper with similar VTAC rail.

It's a factory RRA LAR15 16", lol. I just threw it together.

 

[DEC]

I've owned a few AR's, but this is my first build ... well I assembled the lower if that counts.

All Palmetto. Palmetto lower, Palmetto 16" Dissipator upper, Magpul furniture. Keeping it simple. It is light and shoots so sweet.

 

[Tombs]

^Awesome build man!

Always hated dissipator style ARs, but that forend makes it much more attractive.

 

[turnerdye1]

Del-Ton 16" Carbine, Magpul MOE accesories, VTAC light mount, Surefire C2 light

 

[Taylorz71]

First AR work in progress. DPMS lower with S&W upper assembled parts, Magpul MOE accessories with stock coming, and Nikon M-223 scope.

 

[j706]

Here is my Noveke barreled SPR type AR I built. Not bragging but this thing shoots! It shoots everything I have ever loaded for it but it loves 77 Noslers with TAC.

 

[rvb]

9mm AR. SBR (5" barrel) with AAC silencer.

Colt Sporter II

My "go to" gun. complete build.

Basic A2 plinker from old parts laying around.

Soon to be used for 3-gun. Just needs trigger group, bolt carrier, and a TR-24 on top.
WOA SPR barrel, Rolling Thunder comp, A1 stock.

Vietnam Commemorative A1 Bushmaster from the American Historical Foundation.

wish I had time to shoot 'em more.....

-rvb

 

[marshallartist]

Here's my contribution.

She's a Stag Arms Model 2 w/ a Surefire 660 Universal Weaponlight and a basic 2-point sling. Hopefully my LMT fixed rear sight will be arriving soon and I can replace the MI ERS flip-up sight. There's nothing inherintly "wrong" with the ERS I just prefer the simplicity and ruggedness of a fixed sight. If I need extra clearance for an optic later on then I'll go back to the ERS, but I'm several hundred dollars away from that right now.

 

[mvician]

 

[N_K_1984]

@ mvician, just curious, what rear sight are you running?

 

[Jtgarner]

looks like matech

 

[mvician]

@ mvician, just curious, what rear sight are you running?

KAC 200-600m

current specs........

Lower
KAC SR-15 receiver
KAC lpk, KAC 2 stage trigger
Magpul BAD, ASAP, CTR, MOE grip

Daniel Defense H2 buffer, tungsten powder

Upper
KAC SR15-M4 receiver
LMT M16 BCG and CH
Colt 6920 barrel 16" 1/7 twist, AAC Blackout muzzle device
KAC M4 free float rail, Magpul XTM panels, KAC VFG
SureFire Scout with TNVC head
AimPoint Comp ML2 in a KAC mount and KAC 600m buis

http://www.youtube.com/watch?v=wUqXmdNGZOA

 

[Tombs]

Since I got a new camera I wanted to take a nice picture of mine, since my last camera was total garbage. Yay for panasonic zs5, probably the nicest point and shoot camera I've ever found. 1 second exposure at 80iso, very low light.