Anyone reloading for 350 Legend?

[n9tkf]

Just wondering if anyone is reloading the 350 Legend. What bullets are you using? Pros and cons?

 

[CJP]

I bought 4 different powders to try in my CVA Scout. They are Hodgdon H110 and Lil-Gun, Alliant Power Pistol 300 MP and AA1680. I'm using Rem 7-1/2 primers and Winchester brass. I chose the Hornady 170 gr SP IL bullets to reload. I contacted Hornady and they said the top end for that bullet is 2400 FPS. I loaded rounds with all four powders to find out the loads that got me closest to 2400 FPS. I then loaded down 1/2 grain at a time until I had six strings of 4 rounds with each powder. I did this to chrono and group test at 100 yds the 96 rounds out of the 100 pieces of new brass. The weather needs to warm up significantly before I can do the chrono and group tests.

 

[Hookeye]

Barnes make anything for it yet? Have not looked.
If so.....max V?

 

[CJP]

My buddy was online with some guy from MI and he has been loading Barnes 357 XPB bullets for his 350 Legend. I might have to buy a box to see how they work in my CVA Scout rifle. I was told by my buddy that the fellow that he was talking to was shooting 200 yds plus with the Barnes 140 gr 357 XPB.

 

[guinnb]

Thinking this will be my next build. Really would like 1680 loads to work out as that's the same powder I load for my AK....Yes, really, someone loads for AK

 

[AmmoManAaron]

I reload for AK (x39) also, but I load tracers almost exclusively

 

[CJP]

I have gone in another direction from my previous post. I now have a Winchester XPR bolt action rifle. I'm now looking for loading info for 150gr Makers Rex bullets. I have H110 and Lil-Gun powders. Any help would be greatly appreciated.

 

[BIGred7173]

I loaded using h-110 and new star line brass. Hornady 165gr projectiles. I wanna say I was loading middle charge to start and it was hot as ****. At least compared to factory rounds. Using AR 16” barrel. Mid length gas system. I have also read other folks say to be very careful as even published min charge can be too hot.

 

[Fixer]

I have loaded a few Hornady 170gr with the following. Seem to function in my AR 350 Legend.

Hodgdon

Lil'Gun

Min

27.0

2,239

43,500 PSI

Max

27.9

2,307

45,900 PSI