Experimental intermediate size action with the Montana PH, for comparison.
It is an experimental action for our 416 HSM, to do our speed testing with
and get a better action than Cheytac size actions, for bigger case ELR use,
without going all way up to more expensive, huge actions.
It...
Experimental intermediate size action with the Montana PH, for comparison.
It is an experimental action for our 416 HSM, to do our speed testing with
and get a better action than Cheytac size actions, for bigger case ELR use,
without going all way up to more expensive, huge actions.
It...
About 416 cal bullets............
The heaviest 550 gr for Extreme ELR probably be best 8 to 1 twist , in 416 caliber bullet,
and 520 gr 9.5 to 1, and 470gr 10 to one, Some barrels I picked up are 10 to 1.......
Now a novel idea is to lighten rear of bullet with small shallow hole drilled...
About 416 cal bullets............
The heaviest 550 gr for Extreme ELR probably be best 8 to 1 twist , in 416 caliber bullet,
and 520 gr 9.5 to 1, and 470gr 10 to one, Some barrels I picked up are 10 to 1.......
Now a novel idea is to lighten rear of bullet with small shallow hole drilled...
Here is sectioned 585 HE case in the middle, we first made from
another case, years ago before we had factory run of brass and
it had perfect thickness on the sides and inside corrner.
We could fire them many times without sides thinning..
First case is factory run of our 585 HE...
Here is sectioned 585 HE case in the middle, we first made from
another case, years ago before we had factory run of brass and
it had perfect thickness on the sides and inside corrner.
We could fire them many times without sides thinning..
First case is factory run of our 585 HE...
Here is picture of thick 375 case sent to me, with thick sided trex case, and our HE case,
The thick 375 case is .050" bigger OD base, but inside is no bigger than HE cases..
These thick sided 375s stuck for the guy using them, when loaded over 44,000 psi....
Got guys asking and doing...
Here is picture of thick 375 case sent to me, with thick sided trex case, and our HE case,
The thick 375 case is .050" bigger OD base, but inside is no bigger than HE cases..
These thick sided 375s stuck for the guy using them, when loaded over 44,000 psi....
Got guys asking and doing...
Guy sent thick sided 375 case, next size base diameter up from Nyati.He said,
'Yes I ran them in a ___________ rifle built by ____, the best I
could get was 44000 psi, any more and they were stuck''
Big bore guys. other forums over the years related that trex/african case in 585
size, thick...
Guy sent thick sided 375 case, next size base diameter up from Nyati.He said,
'Yes I ran them in a ___________ rifle built by ____, the best I
could get was 44000 psi, any more and they were stuck''
Big bore guys. other forums over the years related that trex/african case in 585
size, thick...
Here is a drawing depicting the layout of thick and thin sided cases,
like my 585/375/416 HE thin sided ones and the thick one in picture.
And my 585 case is not perfect, as where it transitions from the
heavier corner to the side it isn't gradual, so case separates there
shortening case...
Here is a drawing depicting the layout of thick and thin sided cases,
like my 585/375/416 HE thin sided ones and the thick one in picture.
And my 585 case is not perfect, as where it transitions from the
heavier corner to the side it isn't gradual, so case separates there
shortening case...
Here is picture of 620 416 hsm cases half done. Done on cnc ,
that slimmed them down, cut new rim and extractor groove.
There are over 500 more at cnc getting done now, plus we have
1000s more bmg cases we make them from, when needed..
This case is public domain and if anyone wants...
Here is picture of 620 416 hsm cases half done. Done on cnc ,
that slimmed them down, cut new rim and extractor groove.
There are over 500 more at cnc getting done now, plus we have
1000s more bmg cases we make them from, when needed..
This case is public domain and if anyone wants...
For big long cases our testing is showing that the 416 easier to get powders to work with, less problems ..
Maybe building a target gun,don't have 375 barrel all ready, maybe go 416....
We got cases, 416 HE and 416 HSM, as well as 375...
CEB and others will have bullets...CEB will be doing...
For big long cases our testing is showing that the 416 easier to get powders to work with, less problems ..
Maybe building a target gun,don't have 375 barrel all ready, maybe go 416....
We got cases, 416 HE and 416 HSM, as well as 375...
CEB and others will have bullets...CEB will be doing...
Here is recap simple setup to get faster loads with 12ga sabots
& slugs, Example using break actions...., reaming chamber
in a 12ga break action to 3.5" with a 3.5" 12ga reamer, that isn't
something needing special order, and use 3.5" plastic cases , or
get 3.5" brass cases made...
Here is recap simple setup to get faster loads with 12ga sabots
& slugs, Example using break actions...., reaming chamber
in a 12ga break action to 3.5" with a 3.5" 12ga reamer, that isn't
something needing special order, and use 3.5" plastic cases , or
get 3.5" brass cases made...
A 585 HE ...shot with moderate heavy load......
https://scontent.cdninstagram.com/t50.2886-16/20404363_470558053312276_3772630570509533184_n.mp4
Here is a 375 HE target gun set up, by Asteroid Precision...
Here is video of it being tested... And with a 350gr bullet about...
A 585 HE ...shot with moderate heavy load......https://scontent.cdninstagram.com/t50.2886-16/20404363_470558053312276_3772630570509533184_n.mp4Here is a 375 HE target gun set up, by Asteroid Precision...Here is video of it being tested... And with a 350gr bullet about 3450-3475,bolt opened...